29 มี.ค. 2012 installing spark plug wires is critical Din41612 connector
The importance of using dielectric grease when installing spark plug wires is critical Din41612 connector. Modern engines are designed to run hotter than older models for improved fuel efficiency. Spark plug wire boots easily seize to hot spark plugs without dielectric grease lubricating the boot, and they stick to the plug when the wire is removed hxtf3imp. This ruins the plug wire. The grease also helps dissipate heat. For example, ignition modules that fit inside distributors fail in a few thousand miles
Read more: How to Apply Dielectric Grease to Spark Plug Wires Lay out the new spark plug wires, longest to shortest. Remove the longest old wire on the vehicle that is being replaced. Only remove one wire at a time.
Place a small drop of dielectric grease on a cotton swab, and spread it inside the spark plug wire boots. Install the new wire. Follow this procedure with each successive wire, working longest to shortest ip67 connector. Lubricate each boot and install each wire, one at a time, until the job is complete. Be certain and route the wires properly and use wire looms to keep them away from the hot exhaust manifold.
Related articles: http://www.fodconnector.com/DIN41612/