09 มี.ค. 2012 power in American electrical ip67 connector
Installing a car stereo can instantly improve the quality of any ride Waterproof connector . While taking the dashboard apart and splicing wires may seem intimidating, the process is actually very straightforward and should take the average backyard mechanic no more than an hour to complete.
Related Searches: Difficulty:Moderately hxtf3ctb EasyInstructions Things You’ll Need
Screwdriver Electrical tape Wiring adapter (car model specific) Dashboard panel adapter (car model specific) Socket driver and medium bits IDC connector Wire cutter Several feet of speaker grade wire (optional, no wiring adapter) feet of -gauge insulated wire (optional, no wiring adapter) Suggest Edits Send to Phone Brought to you by Send to Phone Please enter your 0 digit phone number only. Send A link to this article has been sent to the phone number provided. Close Reply HELP for help, STOP to end. Message and data rates may apply. Remove the dash panel, and remove the old stereo if applicable. Normally, dashboards have fasteners or screws that hold them in place, and the stereo will have one or two hex head bolts holding it in. The wires on the rear of the old stereo pull out as a male connector, so do not cut these wires. For cars without stereos, this ip67 connector could be missing, or there may not be any speaker wiring at all.